Socket Mobile 1D barcode scanner

You can use the Socket Mobile S700 or CHS 7Ci barcode scanner to scan both digital and printed1D barcodes.

The Socket Mobile S700 and CHS 7Ci are lightweight, portable barcode scanners that connect wirelessly to Shopify POS.

Who is the 1D barcode scanner for?

You should use the Socket Mobile S700 or CHS 7Ci 1D barcode scanners if you want to add products to the Shopify POS cart quickly without browsing your catalog to find them. You can also scan the 1D barcode on a customer receipt to quickly find the order associated with that sale.

The scanner connects wirelessly to Shopify POS with Bluetooth, so you can use the scanner at markets, fairs, popup locations, or a physical store. It's charged by plugging the included charging cable or cradle into a power socket. When fully charged, the scanner's battery lasts for up to 14 hours (about 15,000 scans).

Requirements

To use this hardware with your Shopify store, you need to meet the following requirements:

• the all-new Shopify POS
• a compatible iPad that is running iOS 13 or higher, an iPhone that is running iOS 13 or higher, or a compatible Android device that is running version 7.0 (Nougat) or higher

The Shopify POS app works with devices which meet the following requirements:

The Shopify POS app is available for only iOS and Android devices. It's not available for desktop computers.

iOS 14 permission requirements

If you have updated your device to iOS 14 or higher and use third-party Shopify apps, then you might need to enableCross-Website trackingin your iOS settings.Cross-Website trackinglets third-party Shopify apps that you have installed in your Shopify admin stay connected in Shopify Inbox, Shopify Point of Sale, and the Shopify mobile app.

To enableCross-Website tracking, complete the following steps:

1. Open theSettingsapp on your device.
2. TapShopify,Shopify POS, orShopify Inbox.
3. EnableAllow Cross-Website Tracking.

Where to buy the Socket Mobile 1D barcode scanner

You can buy the Socket Mobile 1D barcode scanner from the Shopify Hardware Store insupported countries.

Pair and connect your barcode scanner with your iPad or iPhone

1. Go to your iPad or iPhone settings (not the app settings) and make sure thatBluetoothis turned on.

2. Turn on the barcode scanner by holding down the power button until the scanner beeps.

3. From Shopify POS, tap≡>Settings.

4. TapSet up hardware>Barcode scanner.

5. When theEnable pairing modedialog appears, scan the barcode. The scanner beeps three times when pairing mode is enabled.

6. TapView available devices.

7. To pair and connect the barcode scanner, tap it when it appears in theSelect An Accessorydialog (you might have to wait a few moments).

If the setup is not successful, thenunpair扫描仪and try again.

As long as the scanner remains paired with the iPad or iPhone, the scanner connects automatically whenever it's in range.

Pair with another iPad, iPhone, or a different Bluetooth device

You can pair your scanner with another iPad, iPhone, or Bluetooth device.

Steps:

1. Unpair the barcode scanner.

2. Pair your scanner withanother iPad, or read themanufacturer's instructionsto pair with a different Bluetooth device.

Unpair your barcode scanner

By default, your barcode scanner tries to connect to the last device that it was paired with. If you want to use your barcode scanner with a different Bluetooth device, then you need to unpair the scanner and iPad first.

Steps:

1. Turn on your barcode scanner.

2. Press and hold the scan button. At the same time, press and hold the power button. When you hear three beeps, release both buttons. Your barcode scanner powers off.

3. From Shopify POS, tap≡>Settings.

4. TapManage connected hardware.

5. Tap the name of your connected barcode scanner.

6. TapForget scanner.

7. Go to your iPad's settings (not the app settings).

8. TapBluetooth.

9. UnderMY DEVICES, tap theⓘbutton beside the Socket barcode scanner.

10. TapForget This Device.

11. TapForget Device.

Troubleshoot the 1D barcode scanner

If you're having trouble scanning barcodes with Shopify POS and the Socket Mobile S700 or CHS 7Ci barcode scanner, then try these troubleshooting steps to fix the problem:

• Check your scanner setup
• Check that your scanner and iPad are paired correctly
• Check your products' barcodes
• Trying to scan in inventory with the barcode scanner?
• Supported barcode types
• Factory reset

Check your scanner setup

1. Are you using the correct barcode scanner? The only 1D barcode scanners that Shopify POS supports are the Socket Mobile S700 and CHS 7Ci.

2. Are you using the barcode scanner with an iPad? The barcode scanner doesn't work with Shopify POS for iPhone or Android.

3. Is the scanner charged and in range of the iPad? Check that the scanner is fully charged and within range (100 meters or less).

4. What type of barcode are you scanning? This scanner works only with1D barcodes. Make sure that you're using a supportedbarcode type.

Check that your scanner and iPad are paired correctly

1. Is the barcode scanner showing asConnectedon the Shopify POSHardwaresettings screen when the scanner is on and in range? If not, then go to your iPad's Bluetooth settings andforget the barcode scanner, andpair it with your iPad again.

2. Is the scanner showing in your iPad's Bluetooth settings? Make sure that the iPad's Bluetooth is enabled and the scanner shows asConnected.

3. When you paired the scanner and iPad, did you scan the correct barcode in Shopify POS? The 1D barcode sets the barcode scanner to iOS mode to work with your iPad. If you didn't hear the three beeps when you scanned the barcode, or if you accidentally scanned the 2D barcode, then the scanner isn't in iOS mode. Unpair it and the iPad, and then pair them again, making sure that you scan the 1D barcode in Shopify POS and hear the three beeps before you move on to the next step.

4. Was the scanner paired with another iPad? The scanner can be paired with only one iPad at a time. Unpair the scanner and the other iPad, and then pair the scanner with the new iPad.

5. Do you have a poor Bluetooth connection? ReadApple's adviceon reducing Bluetooth interference.

Check your products' barcodes

1. 扫描仪识别条形码吗?尝试scanning the barcode of a nearby item that isn't one of your store's products. If your scanner is paired correctly, then you should see anUnrecognized barcodeerror in Shopify POS. If you see this error, then carry on to the next steps. If you don't see an error, thenunpair扫描仪和iPad,ndpair them again.

2. Is the product visible on Shopify POS? If the product's hidden on Shopify POS, then scanning its barcode doesn't work because the app didn't load the product. If you see anUnrecognized barcodeerror, then check the product's availability settings in your Shopify admin.

3. Does the barcode number on the label match the product's barcode number in your Shopify admin? If there are extra zeros at the beginning or end of the number, then delete them and try again.

Trying to scan in inventory with the barcode scanner?

You can't scan in inventory with Shopify POS. The barcode scanner is for quickly adding products to the cart before checkout.

Supported barcode types

The Socket Mobile S700 and CHS 7Ci barcode scanners support the following 1D barcode types:

• Bookland EAN
• Chinese 2 of 5
• Codabar (including ISBT 128 bit concatenation)
• Code 11, Code 128
• 39码
• Trioptic Code 39
• 39码Full ASCII
• Code 93
• Discrete 2 of 5
• GS1 DataBar (RSS)
• GS1-128 (UCC-128/EAN-128)
• ISBN
• ISBT 128
• Interleaved 2 of 5 (ITF-14)
• MSI
• Standard 2 of 5
• Telepen
• UPC/EAN (UPC-A, UPC-E, UPC-E1, EAN-13, EAN-8, UCC/EAN-128)
• VIN

Factory reset

If the troubleshooting steps don't work and you still have trouble with the Socket Mobile S700, then you can try resetting the scanner to its factory settings.

Steps:

1. Make sure that the scanner and iPad areunpaired.
2. Power the barcode scanner back on.
3. Scan the factory reset barcode from the manufacturer'suser manual.
4. Pairthe scanner and iPad again.