Device stands for Shopify POS

Shopify supports a range of dedicated device stands to enable easier viewing and interaction, whether you're standing at a counter or walking around your store.

When you buy aretail custom kitfrom Shopify, you can specify the type of stand you need when you place your order.

Shopify Retail Stand for iPads

The Shopify Retail Stand is available only for merchants in the United States and Canada.

The Shopify Retail Stand is designed for countertop checkouts.

The stand has two parts: a case for the iPad and a base.

To assemble the stand, insert the iPad into the case and then attach the case to the base. To permanently bolt the stand to a countertop, you can purchase a mounting kit from the Shopify Hardware Store in theUnited StatesorCanada. The mounting kit is automatically included when you buy the Shopify Retail Custom Kit.

The iPad charges when it is on the base. You can also charge other devices, such as the dock for theTap & Chip card reader, by using the USB-A ports on the base. The ports are best for charging devices with smaller batteries, such as card readers and phones.

When a customer is paying, you can tilt the iPad towards them so that they can verify the transaction or enter their email address.

The Shopify Retail Stand for iPad 9.7" is compatible with the following 9.7 inch iPads:

• iPad (5th and 6th generation)

• iPad Pro (9.7")

• iPad Air

• iPad Air 2

The Shopify Retail Stand for iPad 10.2"/Air 10.5" is compatible with the following iPads:

• iPad(7日和8日generation)

• iPad Air (3rd Generation)

设置Shopify零售站

1. Remove the end cap from the case.

2. Insert the iPad into the case.

3. Replace the end cap.

4. Optional: Mount the stand to a countertop by using two M5 bolts. You need to drill holes in the countertop and insert the bolts from below into the stand.

5. Plug in the power adapter.

6. To attach the case, place it above the charging connectors on the base. Line up the magnets on the case and the base until they connect.

7. On the back of the base, move the slider button to the lock position to prevent the case from being removed from the base.

@Rest iPad stand by Heckler Design

Model number: HDAR118 or H234- available only in Canada.

The @Rest stand fits any iPad and enables you to use a viewing angle of 30 or 60 degrees. It's made of heavy steel and is designed to stay put wherever you use it most.

Set up the @Rest iPad stand

Follow these steps to set up the Rest iPad stand.

Steps:

1. Attach the four adhesive feet to the base of the stand, to protect your counter top.

2. Turn the stand right-way up and decide which side you're going to rest your iPad on. One gives you a viewing angle of 30 degrees, and the other 60 degrees.

3. Insert the two resting pegs in the holes on the side you've chosen.

4. Optional: You can stick the large adhesive pad to the stand before putting the iPad in place, but this isn't essential.

For more information, refer to thesetup videoon the manufacturer's website.

Universal Tablet Stand

The Universal Tablet Stand is a mount for your device that enables you to switch easily between merchant and customer view. The set includes a Tablet Adapter and a Connect POS Pivot Stand.

The low-set countertop stand is designed to blend seamlessly into the interior of any environment. The device can be screwed down or securely adhered to almost any countertop. You can mount your device to the stand with a simple twist and click.

The Universal Tablet Stand is compatible with all iPads and tablets that have a flat rear surface of 2.4" x 3.5" or larger.

Product specifications

• Manufacturer: Studio Proper
• Height: 2.76"
• Width: 2.76"
• Depth: 2.71"
• Weight: 1.1 lbs

Touch Nexus universal tablet stand

The Touch Nexus universal tablet stand is a mount for your device that lets you to switch easily between merchant and customer view. The set includes a fully assembled Nexus stand, adhesive table mount, and screw mount.

The Touch Nexus universal tablet stand is compatible with all tablets that have a flat rear surface.

Set up the Touch Nexus universal tablet stand

The Touch Nexus universal tablet stand can be configured in slightly different ways to meet your store's needs.

For the most up-to-date instructions about installing your stand, refer to theTouch Nexus quick start guide.

Bouncepad Click tablet stand

The Bouncepad Click tablet stand is a mount for your device that lets you to switch easily between merchant and customer view. The stand attaches securely to your countertop with a micro-suction base and is compatible with all tablets.

Set up the Bouncepad Click tablet stand

For the most up-to-date instructions about installing your stand, refer to theBouncepad Click quick start guide.